![Image](http://i44.photobucket.com/albums/f12/joakwin/Mobile%20Uploads/image_zpsthrnijyp.jpeg)
my dad gave me a zf 5speed, s-42, rated at 420 tq, monster trans, going to stick it behind a 2001 lm7 5.3 v8
and I started to work on the rear suspension
building a tri 3 link and im not sure if the set up will need a pan hard bar or not
the lower link arms are made out of 2x3-3/16 square stock, nice and heavy duty and if I bagged the truck the link arms are already set up for the most part for air bags
![Image](http://i44.photobucket.com/albums/f12/joakwin/Mobile%20Uploads/image_zps5tzktzql.jpeg)
![Image](http://i44.photobucket.com/albums/f12/joakwin/Mobile%20Uploads/image_zpsbqgkxsye.jpeg)
the crossmember is getting cut out because its in the way of the link bars