new here

Discuss anything MiNi related!

Re: new here

Postby Joakwin » Wed Feb 11, 2015 6:34 pm

im not sure where that clip goes

but it should be number 29 in the link that hooks the cable up to the carb
http://www.minispares.com/catalogues/cl ... spx?1~6~58

or number 10 in this link
http://www.minispares.com/catalogues/cl ... x?2~12~118

I think the part I need is the same one that is used for the heater valve cable on the engine, and with the weather we have right now, don't really need a heater
Joakwin
 
Posts: 72
Joined: Wed Dec 31, 2014 7:28 pm

Re: new here

Postby JPMINITUCSON » Thu Feb 12, 2015 12:58 am

Ah! That's known as the "Trunion" on this side of the pond.
A little part with a big job!
http://www.7ent.com/products/cable-trun ... e0034.html
Jon
'81 Aussie Moke Californian
'61 Morris Mini-Minor
'71 Cooper 'S' MKIII
'76 Mini 1000
'13 MINI Cooper
User avatar
JPMINITUCSON
DMC Member
DMC Member
 
Posts: 942
Joined: Sun Jun 04, 2006 3:56 pm
Location: Catalina AZ

Re: new here

Postby Joakwin » Thu Feb 12, 2015 2:59 am

Oh yeah that's the one

I think the one from the heater cable is the same

I will post more pictures this weekend

I found a oil filter for the 998 at Walmart for $3.21
Of all the places, lol
Joakwin
 
Posts: 72
Joined: Wed Dec 31, 2014 7:28 pm

Re: new here

Postby JPMINITUCSON » Thu Feb 12, 2015 3:58 am

Lots if spin on filters fit the Mini:
Oil filters

AC-DELCO 93156323

AC-DELCO PF53

AMSOIL SDF-57

BALDWIN B288

BECK/ARNLEY 041-8988

BOSCH 3330

BOSCH 72150 NOW 3421

CASITE CF966

COOPERS GFE1

COOPERS Z25/2

DELPHI FX 0004

FRAM PH2870A

FRAM PH3600

FRAM PH3614

FRAM PH966B

HASTINGS LF155

K&N HP-2004

K&N HP1002

LUCAS F5578

MANN 056 115 561G

MOBIL M1-102

MOPAR 4105409

NAPA 1374

PIPERCROSS OF106

PIPERCROSS OF106-RBT

PUROLATOR L10028

PUROLATOR L10241

STP S3614

UNIPART GFE148

UNIPART GFE166

UNIPART GFE21

WALMART ST3614

WIX 51374
Valvoline VO25
Jon
'81 Aussie Moke Californian
'61 Morris Mini-Minor
'71 Cooper 'S' MKIII
'76 Mini 1000
'13 MINI Cooper
User avatar
JPMINITUCSON
DMC Member
DMC Member
 
Posts: 942
Joined: Sun Jun 04, 2006 3:56 pm
Location: Catalina AZ

Re: new here

Postby Joakwin » Thu Feb 12, 2015 2:29 pm

I went with this filter

PUROLATOR L10241
Joakwin
 
Posts: 72
Joined: Wed Dec 31, 2014 7:28 pm

Re: new here

Postby Joakwin » Mon Feb 16, 2015 12:40 am

Drove the lhd mini to Yuma and staying the night

Turns out the headlights didn't work because the connectors where it T's off at the front panel
Was bad, ez fix

My turn signals and 4 ways don't work
I know the flasher for the turn signal is bad
And the flasher for the haz isn't hooked up

But the turn signal will be ez to make work

And the idle was at like 1500rpm, lowered it down to
1k

And the car drove nice,
In the mountains the car didn't like it
But never got hot, I did like 80km

And then flat highway rolled at 110km
And if I had to pass the car pulled nice to
135km

It's a Germany spec car, I'm not really sure how fast I was going
But I think 100km is about 60mph
Joakwin
 
Posts: 72
Joined: Wed Dec 31, 2014 7:28 pm

Re: new here

Postby Joakwin » Tue Feb 17, 2015 1:23 am

Ended up using 12 gallons of gas to drive from San diego to San luis Az to tucson AZ
Joakwin
 
Posts: 72
Joined: Wed Dec 31, 2014 7:28 pm

Re: new here

Postby JPMINITUCSON » Tue Feb 17, 2015 1:48 am

Great, about 35 mpg.
Do you have twin tanks?
Jon
'81 Aussie Moke Californian
'61 Morris Mini-Minor
'71 Cooper 'S' MKIII
'76 Mini 1000
'13 MINI Cooper
User avatar
JPMINITUCSON
DMC Member
DMC Member
 
Posts: 942
Joined: Sun Jun 04, 2006 3:56 pm
Location: Catalina AZ

Re: new here

Postby Joakwin » Tue Feb 17, 2015 2:10 am

Single tank

Gas stop is a nice few min break


Image

Next to my brothers gasser
Joakwin
 
Posts: 72
Joined: Wed Dec 31, 2014 7:28 pm

Re: new here

Postby Joakwin » Tue Feb 17, 2015 8:58 pm

I think the clutch went out on the car, its not wanting to disengage the clutch anymore

well, I guess the good thing was that it didn't brake down on the road
bad part is, I need to buy a clutch kit and take the few hours to swap it out

its a verto clutch and the pedal is going down to the floor and its not leaking oil from the slave or master

looking online
mini mania wants $240 plus shipping
7 ent wants $209 plus shipping
gbcar parts $190 plus shipping
dsn classic, 100GBP and flat rate shipping if it will fit in a USPS flat rate box
Joakwin
 
Posts: 72
Joined: Wed Dec 31, 2014 7:28 pm

Re: new here

Postby JPMINITUCSON » Tue Feb 17, 2015 9:55 pm

If the slave is not moving it is probably the master. Maybe just new seals and a light hone would get you moving.
Jon
'81 Aussie Moke Californian
'61 Morris Mini-Minor
'71 Cooper 'S' MKIII
'76 Mini 1000
'13 MINI Cooper
User avatar
JPMINITUCSON
DMC Member
DMC Member
 
Posts: 942
Joined: Sun Jun 04, 2006 3:56 pm
Location: Catalina AZ

Re: new here

Postby Joakwin » Wed Feb 18, 2015 2:49 pm

the slave moves about a inch

I adjusted the plunger nuts and now the clutch has travel

the radiator is leaking at the lower cap
Joakwin
 
Posts: 72
Joined: Wed Dec 31, 2014 7:28 pm

Re: new here

Postby Joakwin » Fri Feb 20, 2015 2:59 pm

i started to JB weld the radiator but its pretty bad, the lower cap and the lower outlet, so I ended up ordering an alloy radiator for the car, and I will have it next week sometime
Joakwin
 
Posts: 72
Joined: Wed Dec 31, 2014 7:28 pm

Re: new here

Postby Joakwin » Wed Feb 25, 2015 11:40 pm

Image

Alloy radiator was just dropped off by team ups
2-core radiator
Joakwin
 
Posts: 72
Joined: Wed Dec 31, 2014 7:28 pm

Re: new here

Postby Joakwin » Mon Mar 02, 2015 2:42 am

Got the radiator installed this afternoon and messed around with the clutch,

Removed the old oil from the clutch master
And put some new stuff in and
Bleed it out to what seemed like a million times
While keeping the level in the master good
And now the clutch pedal feels a ton bit harder to push
And the slave is movng out about a inch to 1.25 inch
And the box is shifting smooth like it should

We'll see if this thing holds pressure for my drive to work tomorrow
Joakwin
 
Posts: 72
Joined: Wed Dec 31, 2014 7:28 pm

PreviousNext

Return to General Board

Who is online

Users browsing this forum: No registered users and 23 guests

cron