HOW-TO: read tire manufacture date code

Discuss anything MiNi related!

HOW-TO: read tire manufacture date code

Postby joe_bfstplk » Tue Feb 02, 2010 8:09 pm

It's a 4-digit code found in an oval stamp at the end of the string of codes starting with "DOT" on the tire's sidewall.
    * The first two digits are the week number.
    * The remaining two digits are the last two digits of the year.

So:
Image
49th week of '04. A tire that's a bit more than 5 yrs old.

HTH!

C ya,
Dutch
User avatar
joe_bfstplk
DMC Member
DMC Member
 
Posts: 70
Joined: Sat Nov 21, 2009 5:18 pm
Location: Mt. Doom, Mordor

Postby danjmcs » Tue Feb 02, 2010 9:41 pm

Yeah, I posted a story about places selling old dated tires that ABC News ran back in 2008. Definitely not good, and something to check on any used car you buy or "new" tires you buy at a shop.
http://www.dynamicminicollective.org/fo ... php?t=4656

These aren't the new tires you just got are they?
Dan
Image
User avatar
danjmcs
Advisory Board Member
Advisory Board Member
 
Posts: 4340
Joined: Sun Jun 05, 2005 5:19 pm
Location: Peoria, AZ

Postby joe_bfstplk » Tue Feb 02, 2010 11:43 pm

That's a picture of the tire that could've killed me or someone else Sunday.

I was lucky that the car behaved admirably when the tire lost air and started self-destructing on a straightaway, just after coming off the ramp from 101 south to 202 east (near Mesa Riverview), and I was doubly lucky it didn't do this to me a week ago Saturday, on the way to or from Tortilla Flats, due to the sheer number of cliffs where one could do a Wile E. Coyote (Yipes!) out there after a blowout....
User avatar
joe_bfstplk
DMC Member
DMC Member
 
Posts: 70
Joined: Sat Nov 21, 2009 5:18 pm
Location: Mt. Doom, Mordor

Postby Louie B. » Wed Feb 03, 2010 1:00 am

good thing to check. You replacing all of them now?
"I don't fail, I succeed in finding what doesn't work"
Image
User avatar
Louie B.
DMC Member
DMC Member
 
Posts: 1893
Joined: Thu Jul 26, 2007 5:17 am
Location: South Central, Yo!

Postby joe_bfstplk » Wed Feb 03, 2010 3:21 am

Louie B. wrote:good thing to check. You replacing all of them now?


Already did.

Yokohama S-Drives, 205/50 R16s....

So far me likey!

C ya,
Dutch
User avatar
joe_bfstplk
DMC Member
DMC Member
 
Posts: 70
Joined: Sat Nov 21, 2009 5:18 pm
Location: Mt. Doom, Mordor

Postby Louie B. » Wed Feb 03, 2010 4:56 am

joe_bfstplk wrote:
Louie B. wrote:good thing to check. You replacing all of them now?


Already did.

Yokohama S-Drives, 205/50 R16s....

So far me likey!

C ya,
Dutch


Very cool! several of us run those (myself included)
"I don't fail, I succeed in finding what doesn't work"
Image
User avatar
Louie B.
DMC Member
DMC Member
 
Posts: 1893
Joined: Thu Jul 26, 2007 5:17 am
Location: South Central, Yo!


Return to General Board

Who is online

Users browsing this forum: No registered users and 4 guests

cron